1. Основен кръстосан метод
The first method is the basic cross method. This method is super simple and it is also the first one I learned. Just cross two elastic cords, then press one cord on top of the other cord, make a circle and tighten it. Then do the same with the other cord to form a cross knot. To ensure that it is strong, I will repeat this step twice and tie two cross възли .
2. метод за циклиране
The second method is the looping method. This method is particularly suitable for stringing beads or making bracelets. I will first pass an elastic cord from the forked end into the small ring end, then push all the beads to the small ring end, and then tighten the elastic cord that is passed through the small ring end. Then cross the left and right hand lines and tighten them, repeating Няколко пъти, за да гарантирам, че те няма да се разпаднат . Накрая, ще скрия възела в дупката на мъниста на близкото мънисто и ще отрежа излишната линия с ножици, като оставя 1 до 2 mm .
3. Паралелен метод
The third method is the parallel method. This method is especially suitable for use when you need to tie a knot quickly. I will first use the index finger and thumb of my left hand to press the size of the hand circumference, and then use my right hand to pull the two parallel elastic ropes to quickly tie the knot. After tying the knot, cut off the excess thread and hide the knot in the hole of the мъниста .
4. метод за подсилване на единичен възел
В допълнение към горните три метода, аз също ще използвам един метод за подсилване на възела . Този метод е да завържем един възел въз основа на един възел . по този начин, има двойна гаранция ., дори ако един от плеловете се разхлаби, другият възел може да продължи да работи .
5. Използвайте инструменти за подпомагане
В процеса на възел ще използвам и някои инструменти, за да помогна . например, иглата за резба може да ми помогне да режа мънистата и да завържа възела по -гладко ., особено когато нанизвате топчета, с помощта на иглата за резба .
6. Помислете за характеристиките на материала
Elastic ropes of different materials may have different elasticity and wear resistance, so when choosing and using knotting methods, I will also adjust according to actual conditions. For example, for elastic ropes with good elasticity, I will choose a tighter knotting method to ensure that it will not fall apart due to excessive elasticity. For elastic ropes with poor wear resistance, I will try to reduce the friction at the knot to удължи живота си на обслужване .
7. Редовна проверка и поддръжка
Последната точка също е много важна, тоест редовно да проверявате дали еластичното въже и неговият възел са износени или разхлабени . Ако има износване или разхлабеност, ще го заменя с ново еластично въже или ще го повторно ще го повторно .